With simplicity and ease of use in mind, the RUCKUS ZoneDirector is purpose-built to address the gap between standalone, feature-deficient access points (APs) that must be individually managed and the costly, complex high-end enterprise systems that are overkill for most small business environments.
Hi,
Is there any way to check passwords for guestpass after generating them? For example, customer lost his password and I want to resend it again. I can't find it in documentation.
Thanks
If a 7762 is meshed (receiving a mesh connection from an uplink), can it provide a 2nd hop mesh signal to more than one downlink?
Stated another way for clarity, I have a wired unit >> meshing to a 7762 >> which in turn meshes to a 7363. This is two...
Using a ZD1100, I would like to tunnel guest traffic back to the ZD and force it out one of the ports that will be connected only to the Internet modem. The other port will be connected to the network switches, but the customer wants to make sure tha...
We are using mostly zf7982's. There are four "composite" pads on the bottom "legs" / spacers.
About 10% of the new APs we purchased lose a pad or two during flat-drop ceiling installation. The pad glue seems inadequate
Any of you guys having this ...
7731 Outdoor AP's. If i need to change the IP address of the AP's, will it effect the ZoneDirector 1100? Do i need to change the ZoneDirector also? As i will be changing the AP's to a different Subnet.
Thanks
