cancel
Showing results for 
Search instead for 
Did you mean: 

ZoneFlex 1200

ty_akin
New Contributor
How do I connect to my zoneflex1200 to setup for the first time on my Mac? Do I need to change my IP address on my computer to match the default on zone director? I can’t seem to find zone director on my network?
3 REPLIES 3

abilashpr
Contributor III
Hi Ty,


Yes, please change the IP address of the MAC PC to a IP from subnet 192.168.0.0/24 and access the ZD at 192.168.0.2/24 from there you can just test run, like set the Static IP and change the system name add username and password and give it two minutes the ZD is ready.


Regards,

Abilash PR

ty_akin
New Contributor
I still cannot get a connection to run the setup. I changed the Mac IP address to 192.168.0.5 stillnwill not connect on my safari browser 192.168.0.2

abilashpr
Contributor III
Hi Ty,

Please ping controller's IP and check it's connectivity if you get any response please access controller using another browser see if you can access controller.

Regards,
Abilash PR