To check If Zone Director has Ruckus Public API

[mikael_tamirie_]

Hello Ruckus Community,

This is to check if Zone Director has Ruckus Public API. I know that you have a public API for the SZ series and vSCG but I could not find any free public API for the zone director controller. Can you check and share the information, please?

[martin_martin · Accepted solution]

Hi Mikael,

There is no  public API on the ZoneDirector platform.

Kind regards

Martin

[mikael_tamirie_ · Accepted solution]

Hello Martin,

Again thank you for your reply,

Actually, I am running SZ version 3.6.2 and the public API is a different one. Can you advise for this version to get a client details like below:

[martin_martin · Accepted solution]

Hi Mikael,

There is no  public API on the ZoneDirector platform.

Kind regards

Martin

[mikael_tamirie_]

Hello Martin,

Thank you for your advice. I will forward to look only at the SZ series and vSCG one.

Another thing I wanted to do is using the MIB browser, I need to get the SNMP data of the client MAC address and other details. Normally, I have come to know that I can not get such data from the WLC via SNMP due to some scalability issue as confirmed by the Ruckus technical support. Normally, we can get some details from cisco WLC. So, what the ruckus technical support advised me is to use public API. But I can not get an exact Get or Post request to get all the client details like client MAC Address and Client IP Address. I am not able to get the result using postman software as well. Actually, I am able to get results on a browser for some GET requests. Can you advise If any of this thing is familiar to you?

Regards,

Mikael Tamirie

[martin_martin]

Hi Mikael,

What version of vSZ are you running? and are you using the Essentials or the High scale one. After that we can see what API options are available.

As example on the high scale 5.2.2 you have this query output you can get when requesting client mac info.

{
  "totalCount": 2,
  "hasMore": false,
  "firstIndex": 0,
  "list": [
    {
      "apMac": "58:B6:33:37:D4:E0",
      "apName": "R710_Box_Up_Pink",
      "hostname": "Nolan_DELL_Laptop",
      "status": "AUTHORIZED",
      "authStatus": "AUTHORIZED",
      "alerts": null,
      "osType": "Windows 7/Vista",
      "deviceType": "Laptop",
      "osVendorType": "Windows",
      "modelName": "Windows 7/Vista",
      "ipAddress": "10.11.0.86",
      "ipv6Address": "2001:b030:2516:164:7074:3f14:f0d9:c939",
      "clientMac": "00:24:D7:89:36:A0",
      "ssid": "NolanWPATest",
      "txBytes": 2099158501,
      "rxBytes": 73731395,
      "txRxBytes": 2172889896,
      "uplink": 73731395,
      "downlink": 2099158501,
      "traffic": 2172889896,
      "uplinkRate": 131194,
      "downlinkRate": 3735157,
      "rssi": -47,
      "snr": 58,
      "radioType": "11a/n/ac",
      "vlan": 1,
      "channel": 36,
      "userName": null,
      "authMethod": "Standard+Open",
      "encryptionMethod": "WPA2-AES",
      "controlPlaneName": "node232",
      "dataPlaneName": null,
      "rxFrames": 952977,
      "txFrames": 1729632,
      "txDropDataFrames": 4,
      "sessionStartTime": 1487400391000,
      "speedflex": 0,
      "wlanType": "0",
      "zoneId": "d6ad32aa-c400-4005-b9c2-1d5b90e44139",
      "zoneVersion": "3.5.0.99.1132"
    },

Regards

Martin

[mikael_tamirie_ · Accepted solution]

Hello Martin,

Again thank you for your reply,

Actually, I am running SZ version 3.6.2 and the public API is a different one. Can you advise for this version to get a client details like below: