R600 failure upgrade firmware on zd1200

[laudir_moura]

I don't remember what version were, when I try ping on APs IP doesn't work.

[sanjay_kumar]

Hi Laudir,

What is the LED status on the AP?
Power off the AP for a minute and turn it on and see if there is any changes.

If not, then try doing a factory reset.

[laudir_moura]

Can I try to downgrade to version 10.2.x.x?

[sanjay_kumar]

Downgrading the ZD will default it. You will lose all the configuration.
However, you can downgrade to the previous version, but I do not recommend it since it is on 9.x version.

I doubt that the ZD in 10.4 will allow the downgrade to 9.x version.

[laudir_moura]

I downgraded it, let's see if it works