I'm currently decommissioning an old 2003 server running DHCP. I've migrated the scopes to a new 2012 R2 server, these include two scopes used by the Ruckus ZD.
The internal scope works fine, users connect to the wifi and receive an IP address (172.16.3.x). When connecting to the external wifi the DHCP server issues an IP address from the correct scope (192.168.1.x) but the IP address is not received by the workstation, it instead uses an APIPA address (169.254.x.x).
IP helper is configured on the switch port, I have re-enabled the old scope of the 2003 server to allow this to run in the meantime.
Can someone please advise why workstations are unable to pick up the IP address assigned to them by the DHCP?