Hello, i found this document: http://www.netadmin.us/docs/Ruckus_Creating_AP_Templates.pdf
which says: "This is an Azimuth orientation (hanging
from the ceiling). It is the most commonly used orientation. If you are hanging it on a wall, use
the EL (Elevation) option."
So if H510 is on the wall ( not on the ceiling ) then i need to consider EL antenna patter for on the floor coverage and AZ between the floors coverage? Right?
Can somebody advise me best practice for H510 placement?
They should be on outside walls ( from indoor side of course ). I want to achieve two rooms coverage per 1 AP, 32 in summary.
Thanks a lot