06-19-2024 11:19 PM
hi admin...i already upgrade ruckus R310 firmware to unleashed ver200.7.10.202.145...but i cannot enter the dns server for controller virtual smartzone..pls help
06-20-2024 10:01 AM - edited 06-20-2024 10:03 AM
Hello @wanji ,
Hope you are doing well ,
I believe there may be some confusion regarding the technologies. Unleashed is a lightweight wireless network where one access point acts as the master, while the others function as members that receive their configuration from the master.
https://community.ruckuswireless.com/t5/RUCKUS-Self-Help/Unleashed-Overview/m-p/76913
However, SmartZone is a controller, whether physical or virtual, capable of managing multiple APs and offering significantly more features than Unleashed. It also provides greater flexibility in terms of network setups.
https://webresources.ruckuswireless.com/pdf/datasheets/ds-smartzone-family.pdf
In unlashed to configure the DNS on the APs is the following :
That command :
set the SCG IP is to connect a standalone RUCKUS Access Point to a SmartZone controller
Unleashed and SmartZone are different technologies with distinct use cases, making them incompatible with each other. To integrate Unleashed APs into a SmartZone controller-managed network, they must first be converted to standalone firmware version and then configured using the 'set scg ip' command to point to the SmartZone controller's address.
Unlashed overview Video :
https://www.youtube.com/watch?v=6tgztOFm4VQ
Smart Zone
https://www.youtube.com/watch?v=8fQvOj6GJYg&list=PLwZotTMbkZQFA_Lm9qjAFKOQMWM3aOCHG
How to setup DNS server on Smart zone :
Best Regards
Fernando Vasquez
06-25-2024 10:23 PM - edited 06-25-2024 10:23 PM
hi Fernando Vasquez ..thank you for reply...as picture below..i already success add the scg ip on ap....but it cannot appeared on controller staging zone...BUT OTHER AP CAN APPEARED ON CONTROLLER..pls help