Unleashed management vLan

[nir_lazar]

Hallo All,

I'm managing 9 vlans environment. each vlan represents wLan and all works like a charm.

only issue is when i'm trying to access IT wLan on a management vLan (management vLan lists all network appliances e.i. AP’s, Firewall, switches Etc), i cant get a DHCP lease. and i know why. its because i gave the master AP an IP address (on the management segment vLan) on the default unleashed vLan.

on all switches i could change management vLan and on unleashed i cant find how to change the management vLan.

when i'm trying to change the management vLan i get a message i cant change the IP address for its the same subnet as defined on the master’s IP add.

please help.

Nir

[nir_lazar]

yes i understand it and this is exactly what i do. i ide like is to know if i can change the default management vlan of the master AP to be on vlan 7.

[Squozen]

You can, but you would need to change the IP of the AP to another network and then set that network as the native VLAN for the trunk. You are already using the management VLAN, because you have not specified a VLAN and the native VLAN for the trunk is 7. There is no problem here. 

[nir_lazar]

ill try it. thanks

[syamantakomer · Accepted solution]

Hello All,

Management VLAN support was added to 200.13 version.

Please refer the 200.13 what's new guide