cancel
Showing results for 
Search instead for 
Did you mean: 

Unleashed 200.6.10.1.310 Limited amount 5GHz channels?

sureal_alamsjah
New Contributor III
On R310 Unleashed AP's on 5GHz it shows only channels 36, 40, 44, 48 are available for indoor and outdoor channels? It has firmware 200.6.10.1.310. Are the other 5GHz channels not supported anymore?

12 REPLIES 12

robert_lowe_722
Contributor III
There is now a  200.6.10.1.312 release. The RN's don't mention this issue specifically but maybe worth an upgrade

stephen_hall_60
Contributor
I could be off on this, but i recall there is a setting (maybe in System-> Country code) that is channel mode- allow indoor channels?    this may only apply to outdoor APs only though.

I can tell you on the 1x unleashed setup we have, (latest FW) it does show 149 153 157 161 5g channels (so a bit more than your list).

ken_liu_dlob4xe
New Contributor III
Login webUI, please check Channel Optimization: "Optimize for Performanceis selected from
Admin & Services Tab, System->Country Code.



sureal_alamsjah
New Contributor III
Thnx!

Something weird is happening on that page. When i access the Country Code page the extra channel settings show up for a second but then they dissapear and only the country selectionbox is visable.

I noticed this behaviour with FW 200.5.10.0.235, 200.6.10.1.310 and 200.6.10.1.312. You can only select a country (NL in my case), thats all.

Tried it with 2 different browsers on 2 computers, Firefox and IE, and with two different Unleashed networks.