Setting up two Unleashed system divided by VLAN

[jens_1027613]

Hi

I have an Unleashed installed with R310 and R610's at a school. Two SSID's on VLAN1 and VLAN500.
I have to set up a couple of AP's in a nearby building and want to set up an R350 and an R550. As they are not compatible, I have created a VLAN200 so that all untagged traffic at the remote building is on VLAN200. 
But whatever I seem to do, the new AP's keep seeing the old ones. They are not within radio range and I have tried to block ANY traffic to/from the AP from other networks.
Bonjour gateway is disabled on the current network. 

What might I be missing?

MacAddress IpAddress Role CfgID StaRate FreeMem MeshEna MeshNode MeshNodeType Model ActiveVer BackupVer SysTime BoardType UpTime LastSeen
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
90:3a:72:06:16:b0 10.11.13.3 member 9517 63 290028 1 0 1 R610 200.7.10.202.127 200.7.10.202.121 0 r710-5-30-4bss [2 hrs 52 mins 21 secs] [Tue Apr 4 11:06:54 2023]
90:3a:72:06:25:60 10.11.13.1 member 9517 54 286820 1 0 1 R610 200.7.10.202.127 200.7.10.202.121 0 r710-5-30-4bss [2 hrs 52 mins 21 secs] [Tue Apr 4 11:06:54 2023]
18:4b:0d:08:36:10 10.11.13.0 member 9517 41 168612 0 0 0 R310 200.7.10.202.127 200.7.10.202.121 0 zf7752-3-29-4bss [2 hrs 42 mins 23 secs] [Tue Apr 4 11:06:49 2023]
90:3a:72:06:20:10 10.11.13.2 master 9517 58 249028 1 0 1 R610 200.7.10.202.127 200.7.10.202.121 9817 r710-5-30-4bss [2 hrs 52 mins 26 secs] [Tue Apr 4 11:06:49 2023]
18:4b:0d:08:1f:70 10.11.15.133 member 9517 34 166964 0 0 0 R310 200.7.10.202.127 200.7.10.202.121 0 zf7752-3-29-4bss [2 hrs 52 mins 37 secs] [Tue Apr 4 11:06:54 2023]
c8:84:8c:08:92:b0 10.9.0.31 member 1 77 527028 1 0 1 R550 200.10.10.5.229 200.10.10.5.229 0 r730-5-32-4bss [11 mins 26 secs] [Tue Apr 4 11:06:53 2023]
18:4b:0d:08:17:b0 10.11.15.135 member 9517 44 168464 0 0 0 R310 200.7.10.202.127 200.7.10.202.121 0 zf7752-3-29-4bss [2 hrs 52 mins 33 secs] [Tue Apr 4 11:06:47 2023]
18:4b:0d:08:12:00 10.11.15.134 member 9517 43 168820 0 0 0 R310 200.7.10.202.127 200.7.10.202.121 0 zf7752-3-29-4bss [2 hrs 52 mins 33 secs] [Tue Apr 4 11:06:48 2023]
18:4b:0d:08:20:30 10.11.15.136 member 9517 44 169136 0 0 0 R310 200.7.10.202.127 200.7.10.202.121 0 zf7752-3-29-4bss [2 hrs 52 mins 32 secs] [Tue Apr 4 11:06:48 2023]
OK
rkscli:

[Jayavidhya]

Hi @jens_1027613

Greetings of the day,

Thanks for your detailed description,

To have the SSID broadcasted only on specific radios we need to have a separate WLAN group that can be mapped to an AP group radio.

Step 1:  Go to Network -> Wireless LANs and create a Wlan group.

Step 2: While creating the SSID, map the SSID to the newly created WLAN group or you can also edit the current SSID setting to map the SSID to the newly created WLAB group.

Step 3: Go to Network -> Access Points. You can either edit the AP Group level configuration or edit any specific AP with the same zone as the created SSID.

Click on edit on access point group or AP and navigate the Band/Spectrum configuration and client on override ‘WLAN group’ and select the WLAN group which has the radio-specific SSID mapped.

Note: If an SSID needs to be broadcasted on both radios make sure the SSID is added on all required WLAN groups.

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community