CommScope RUCKUS Community Forums

al_quiniones · ‎11-23-2020

I'm working on a request from a client that we recently acquired. They have several R310 WAPs with Ruckus Unleashed 200.5 . They are not able to do any WiFi calling at the moment. I have searched the existing settings and I have not been able to locate any settings for WiFi calling. I read through the release note for the later releases but I do not see any information about WiFi calling. I am wondering if WiFi calling is possible with Ruckus Unleashed? Thank you in advance.

syamantakomer · ‎11-23-2020

Hi there,

WiFi calling settings were added in 200.9 version of Unleashed.

R310 cannot be upgrade beyond 200.7, hence these settings will not be available for these APs.

WiFi calling settings on APs/controller just improves the VoWiFi quality and call handling. However, you should still be able to use WiFi calling, as long as your mobile phone support it.

If you are having trouble with VoWiFi, check if your ISP's ePDG gateway is reachable when you are connected to the WiFi. When you enable VoWiFi on your handset, it tries to reach ePDG gateway to resolve it's IP address and then establish ISAKMP tunnel with ePDG gateway and ESP(Encapsulating Security Payload) packets then will be sent to the ISP gateway.

View solution in original post

CommScope RUCKUS Community Forums

Ruckus Unleashed Wi-Fi Calling