cancel
Showing results for 
Search instead for 
Did you mean: 

R610 unleashed vlan eth1

Kevinc
New Contributor

I have two R610s at the house running unleashed.

I can ssh in and run command "set interface eth1 type access untag 76" to do what I want, just looking to have it done automatically.

I see some options that can do this for some models, in the specific model controls for the H320 for instance. But that is not an option for R610.

Is there a way to configure boot scripts to do it on the device? Or any other way to do so?

 

5 REPLIES 5

syamantakomer
Community Admin
Community Admin

Hi @Kevinc,

VLAN configuration for secondary eth ports is not supported for all AP models. Only specific  AP models with multiple ports like our H series APs supports it.


Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RASZA | RICXI

RUCKUS Networks, CommScope!

Follow me on LinkedIn

The CLI config option works, so it seems like this model can support it if you choose to add it.

Are there any on-device script methods of setting it after boot?

Unfortunatly, Unleashed doesn't support scripting. However, you can do it from CLI, but I don't think configuration will survive a reboot.


Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RASZA | RICXI

RUCKUS Networks, CommScope!

Follow me on LinkedIn

Hello, what is the commandline option for tagging a port with a VLAN ID on the R610/R510?