Hi. Seemslike my r500 can't support iphone and ipads. I have couplé devices with latest but also with older iOS versions. All of them have big problems with connecting to r500 (latest firmware in). All stucked on getting or renewing DHCP. Anybody have any idea? I already set 20M chanells on both 2,4 and 5 GHz networks, still this is not helping anyhow. Windows devices do not have this problem.
Also No problems when i am connected to my old cisco AP.
Going through many upgrades over last 3 years had not had ipad connection problems you describe. Presently on ZD1125 (126.96.36.199 b29 for compatibility reasons) with R500s in school supporting 80+ ipads/minis on 9.3.5 and 10.1.1
If you are using newer firmware than this (very possible) check release notes for any mention of ipad bugs/known issues, might get lucky and find something.
Hi. On first time connection to R500 took very long time for iANYTHING to get dhcp address from AP. This problem do not exist for Android and Windows.
Previously reconnecting was impossible for iphone/ipad. Today I turned off most of nice AP features, keep channel thin, use only one channel, and only one SSID, and looks like maybe it will work - still testing it. Interesteing that when I had 2 SSIDs problem occured again.
Still when device goes out of sleep mode takes them a lot of time to reconnect. When I reconnect to old net, all devices are connect within seconds