Newly created WiFi ssid not seen in available networks

[dmoorthi]

Hi

i have 2 R550. My home WiFi is working fine. I decided to create a guest WiFi network. I created it and ruckus says it is active with no connections. But I am not able to see this newly created ssid WiFi in any of my devices as available WiFi network. 

I restated my APs (I do not use Icx switch). One master and client AP hardwire connected. I have a non-WiFi router just for firewall and routing. 

Thanks for your help. 

[dave_raines_86z]

Is this a standard or unleashed setup?

[dmoorthi]

Unleashed.

[syamantakomer · Accepted solution]

Hi @dmoorthi ,

A couple of information required.

• What is the current firmware version on Unleashed APs?
• SSH into one of the APs and run below command to check if WLAN is actually deployed or not.
  • get wlanlist
  • If you are doing it in master AP, then first run
    • ap-mode
    • get wlanlist
• Make sure SSID is not set to hidden.
• Are you using AP groups? If yes, you may have to verify the group settings.

[dmoorthi]

@syamantak_omer 

Omer

As usual, thank you for your input and help. I was able to log in to the Master AP via http/web browser. As you had mentioned, the newly created SSID was in an AP group but was not included in the group in the AP. Once I moved the SSID to the AP, then it started working.

Thanks again.