RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
Hi, I can't get my wireless clients to Automatically connect to the DNS server specified in server settings. I have manually set the DNS Server as 208.67.222.123, and it shows that IP address in the Internet Summary. But all my wifi clients continue to connect to 192.168.1.254 (my gateway address) instead. Any help would be greatly appreciated, as I am attempting to setup a Family Safe DNS for our home. Thanks!
Hi @esy,
Please share screenshots of the DHCP setting from your unleashed, below marked options in yellow should be enabled to assign IP address and DNS from Access Point.
Admin and Services>>>>>System>>>>>IP Setting
WAN IP Address : Manual(check)
LAN and WLAN Client IP Address: DHCP Server (check)
