IP Based Rate Limiting not working properly

[mkayze]

Im not sure if im doing this right but I am trying to limit certain devices on the network using a R600 but everytime I apply the policy on the WLAN, it limits all the devices thats connected instead of just certain IP's.

Under IP based User Defined Application;

Name: Tablet

IP Address: 192.168.1.21 (local ip)

Netmask : 255.255.255.0

Port: 443

Protocol: tcp

I then create an application policy

Rule Type: Rate Limiting

Application Type: IP based User Defined Application

Application: Tablet

UpLink: 1mbps DownLink: 10mbps

anyone have an idea?

[syamantakomer]

Hi There,

Could you provide screenshots of the WLAN configuration and show where exactly you are applying the application policy.

As per my understanding, you are creating a application policy which will only work for the traffic coming from/to 192.168.1.21 with port 443 (TCP). Anything else using this IP will not rate limit.  I suggest NOT to use the policy this way, as it will not work as you are expecting.

Regards,

Syamantak Omer