How do I turn off the LEDs in my R510 AP?

[Anonymous]

Unfortunately the two of the four R510s in my new home were installed on the ceiling of bedrooms... really.

I understand there is a way to set the R510 AP so the LEDs are off, in this way there would be no steady or flashing lights in the bedroom.

It is a health concern for us because my son has sleeping apnea and currently having issues due to the lights on the ceiling.

I wanted to give this a try to determine if it is worth or definitely we will need to relocate these two R510 APs to the hallway.

[Anonymous]

Thanks @fabian_garzon_baquero 

I may not be using the right application. I don't see that option in my Unleashed app, I am using an iphone.

It shows: Total 4 APs and it shows them below, when I open any of them under Edit AP, the only thing I can edit is the AP Name.

[syamantakomer]

Hi Diago,

Refer the below online help page for Unleashed:

https://docs.commscope.com/bundle/unleashed-200.10-onlinehelp/page/GUID-4ABA3666-AFCF-42D2-854B-612A...

[Anonymous]

Thanks @syamantak_omer 

I created a group in my unleashed app in my iphone.

Then I see the pencil icon (for edit) and I have three options to edit:

• Select AP(s)
• Select WLAN(s), and
• Radio Settings

I don't have the OTHER setting that is mentioned in the referenced link  document:

1. Go to Access Points > Summary > Edit > Other.

Am I using the wrong application?

[Anonymous]

Access using a Browser in your Network typing the ip address, for example https;//192.68.0.2

Or use the following URL https://unleashed.ruckuswireless.com

FABIAN

[syamantakomer]

@diego_narvaez try to access using a laptop or even you can access using your phone's browser when connected to same Wireless network.

https://unleashed.ruckuswireless.com

Or if you know the IP, that too you can use.