cancel
Showing results for 
Search instead for 
Did you mean: 

Cumulate two routers

jean_claude_hym
New Contributor II
Hi, 
I have an ADSL router on one port RJ45 in AP R500, there is another rj45 port available.
I
s it possible to add an additional router on RuckusAP R500 ? if it's possible, how to do ? Many thanks

					
				
			
			
				
			
			
				
			
			
			
			
			
			
		
11 REPLIES 11

michael_brado
Esteemed Contributor II

okay, I use  Unleashed firmware (200.7.10.202.94)

syamantakomer
Community Admin
Community Admin
Hi Jean,

What is the use of second router in this setup? Any specific requirement?

For sure you can connect a network device behind R500 on its second eth port but second eth port acts as a bridge/switch port. Means second router you are going to connect to this port will get IP address from the same subnet (Assuming that AP is running on Unleashed code).

Please confirm your use case.

Regards,
Syamantak Omer

Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn

sometimes I use the 4g router because it has more up and down speed. But it is in the punctual way (the router is put at the edge of my window).