Cannot get R610 up

[patrick_hamann]

Bought another R610 to add to the two that I already have. Cannot connect to it at all whether it is via http/ssh/ or unleashed.ruckuswireless.com.

 Have tried with my linux machine and windows machine, three different browsers...

If I add it to my existing network it will pull an IP address from DHCP but cannot connect to that IP address either. Won't accept any password that I use(have tried admin/sp-admin/SN of AP.)

If I connect directly to it(192.168.0.1), it says address unreachable. 

My first two AP's were up in a matter of minutes so I am completely lost as to why I cannot for the life of me get this one up. 

[eizens_putnins]

What image version was on AP before flashing? What version have you flashed? Can you connect to WEB-GUI after AP starts? What is the power supply (should be 802.11at)?

[syamantakomer]

Hi Patrick,

Try to factory reset again and see if it gets stable.

AP might be in reboot loop due to upgrade failure.

Try to flash the AP again with correct Unleashed firmware image and see if AP gets stable.