Ok, so you have R310 and R610 APs previously configured in standalone mode. Later, you upgraded them to Unleashed and made a single Unleashed network. However, you are still seeing old WLANs which were configured on standalone APs.
How many APs you have? Could you make sure all the APs are part of single Unleashed network after the upgrade and all the APs are showing in Unleashed GUI.
Try to connect to the old WLAN and see if you are able to connect. Also double check if old WLAN and new one configure on Unleashed has different names.
If you are able to connect to old WLAN, this mean there is another AP in the network which is still running in standalone mode or there is another WiFi router using the same SSID name.
I have 50pcs r310 and 15pcs r610 connected to zonflex placed inside "number one building",
I wanna unleash the firmware of something about 10pcs or maybe less, put them in different (lets say "number two buliding") building with different internet account and different router but I still wanna monitor them from the first "building one "with the zoneflex
Can I do this if I flash the unleshed firmware on them?