cancel
Showing results for 
Search instead for 
Did you mean: 

802.1X using EAP TLS

aaron_piazza
New Contributor II

RADIUS Client:  Ruckus R710 Unleashed

RADUIS server with NPS - Windows Server 2016

When I configure the AAA Servers on unleashed and set TLS to enable the shared secret greys out and is inaccessible. 

How can I know the shared secret so I can configure that on the RADUIS server?

Image_ images_messages_6079da8b10fddf6912f69a82_c04c6ed0ee326168f5c91cb4b2a1469b_TLS-b66cb569-04cb-4f93-8bd4-13b3c2c47a97-505158578.jpg

 

7 REPLIES 7

syamantakomer
Community Admin
Community Admin

Hi Aaron,

Could you confirm what it the Unleashed software version.


Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn

I see the same in my Unleashed,

Ver: 200.9.10.4.212

I figured it out.  If you click on the eye symbol it reveals the shared secret.  Mine shows radsec as the shared secret.

I have a test network which includes the following:

1. Ruckus R710 Unleashed version 200.9.10.4.233

2. Microsoft Server 2016 configured as a DC, Radius, NPS, CA, DHCP, and DNS.

My goal is to test setting up wireless authentication using 802.1x EAP-TLS.

I have the following devices that need to authenticate:

1. non domain devices (iPads)

2. domain devices (windows 10 pc's)

Does anyone have good information on setting this up?  

I was able to configure the PC using EAP without TLS, but when TLS is turned on it won't connect.