Brocade ICX 6450 POE trunk port

[antonio_gualtie]

Hi guys, 

i have questions. I have to connect the ICX 6450 POE switch through a trunk port with a cisco switch. Is it possible? Is it possible to connect two Brocade ICX 6450 POE in trunk ?thanks 1000

[hashim_bharooc1]

Hi Antonio,
Hope you are doing Great!!

Yes we can connect using static lag which is the same as static port channel on Cisco.
Please see our L2 guide LAG section:
http://docs.ruckuswireless.com/fastiron/08.0.30/fastiron-08030-l2guide/fastiron-08030-l2guide.pdf

Sample configuration:
lag lag1 static id 124
ports ethernet 1/1/2 to 1/1/3
primary-port 1/1/3
deploy

You have to match the port speed and media type to be the same.

Hope this helps.
Thanks
Hashim