vsz to vsz

[gaetan]

I currently have a vsz hosted on a server and I've installed a new vsz locally. How can I migrate the APs and configurations to this new vsz? Does a backup restore work even if the vsz IPs are different (192.168 to 172.16)?

Thanks

Gaétan

[Ambika-leimapok]

Hi Gaetan,

May I know the firmware version of the old vSZ?

[Ambika-leimapok]

Hi Gaetan,

In 5.2.2 version, there is no option to download the Cluster backup however you could take a configuration backup and restore the Configuration backup on new vSZ 

NOTE: Configuration backup would have network device's configuration and settings but not the entire Cluster configuration.

To take a Configuration Backup go to Administration->Backup and Restore->Click on Configuration Tab-> Click on Backup.

Once the Backup is taken, click on that Backup taken-> Click on Download 

To restore, Login to new vSZ WebUI-> Go to Administration->Backup and Restore-> Configuration-> Restore->Then upload the taken Backup file-> Click on restore 

[Ambika-leimapok]

Make sure you do the license migration from old vSZ to new vSZ 

https://support.ruckuswireless.com/articles/000006122

To move your AP to new vSZ, verify if your APs are discovering controller through DHCP Option 43 or DNS or static, follow the instruction given below 

https://community.ruckuswireless.com/t5/RUCKUS-Self-Help/AP-Discovery-How-to-configure-DHCP-option-4...

https://support.ruckuswireless.com/articles/000008703

https://community.ruckuswireless.com/t5/RUCKUS-Self-Help/How-the-APs-discover-the-IP-address-of-the-...

[gaetan]

Firmware Version

5.2.2.0.1563

[gaetan]

Merci je vais essayer de faire cela.

Cordialement,