1 ACCEPTED SOLUTION
Understood. Please try the following.
- Login to temporary controller > Network > Access points > Choose an AP zone > Select one AP from the list, which you are planning to move to your main controller.
- Clock "more" > "switch over cluster" > enter Control IP of your main controller. If main controller is behind a NAT service, enter the respective control NAT IP
- Prior to moving an AP, try to ping the main controller's control interface IP from the AP.
- It would be good, if the AP you selected is one you have physical access to, just in case it does not join the new controller, SSH access to the AP is needed to recover it.
- Make sure the main cluster has sufficient AP capacity licenses to support the additional APs.
