Hi @sander_van_veg1
When creating the SSID, you will have 2 options for setting the Rate limit.
1. Rate Limit Per SSID.
2. Rate Limit per User (UTP profile)
To configure the Rate Limit per SSID : under SSID >> Advanced Options >> SSID Rate Limiting
You can se the Rate limit for Uplink and Downlink.
To configure Rate Limit per User : under SSID >> Firewall Options >> Firewall Profile >> Click on Create >> Set the Uplink and Downlink.
I hope this should help your requirement.
Note : Rate limiting in user traffic profile will not work if SSID rate limiting is enabled.
