10-23-2022 10:49 PM
I recently installed a patch on Smartzone 104 to support R550 APs running below firmware details. Then created a Zone and moved the R550 to the new Zone. if i try to push firmware (highlighted in red) i dont get option to pick the new firmware to push to the R550. Please note that support license for this controller is out of service.
Ruckus-01# show version
Model : SZ104
Serial # : **************
SZ Version : 188.8.131.52.515
Control Plane Software Version : 184.108.40.206.383
Data Plane Software Version : 220.127.116.11.101
AP Firmware Version : 18.104.22.168.709, 22.214.171.124.354, 126.96.36.199.759, 188.8.131.52.5527, 184.108.40.206.698
10-26-2022 11:11 AM
When you created the zone, what AP firmware was selected?
10-26-2022 11:39 AM
The only visible firmware is the default firmware 220.127.116.11.101 and not 18.104.22.168.5527.
10-26-2022 11:47 AM
Could you pull the controller upgrade history and share.
If controller was running on 5.2.0 in past, you may not be able to create zone with old AP patch.
10-26-2022 09:53 PM
HI Thanks for your response, please allow me to get more details and share.