cancel
Showing results for 
Search instead for 
Did you mean: 

SZ100 bios setup mode

hyomoon_kim
New Contributor

Hello,

Our partner company was testing with SZ100 ver. 5.2.1.0.515.

After initializing the equipment, we downgraded the version to 5.2.0.0.699 and rebooted it.

Then it turned right back to the BIOS setup mode.

Image_ images_messages_5ff3ce14024db517c767ff02_05375178c41006a80a78a235dfdd0e67_BIOS1-1da19b57-7403-4e74-8e1b-d1313d107067-1135474335.pngImage_ images_messages_5ff3ce14024db517c767ff02_0cfbd0388408792cb50a5c70eb6f6f97_BIOS2-6d408181-e47b-4428-9c0c-f4fd901d4b61-1134550814.png

Is there a solution or a way to install SZ OS normally?

Regards,

1 REPLY 1

syamantakomer
Moderator
Moderator

Hi,

Try factory reset controller once and see if you can recover it with OS image. If not, please open a case with support to get the replacement.

Regards,
Syamantak Omer
Official Rep | Staff TSE | CWNA | CCNA | RASZA | RICXI