cancel
Showing results for 
Search instead for 
Did you mean: 
5 REPLIES 5

james_mckenna_5
New Contributor III
Thanks Gareth, I'll get this checked and refer it to our documentation team. I appreciate you taking the time to report this.

FYI (as an aside) in 5.1 onwards HTTP access has been removed from the Setup Wizard, leaving only HTTPS://.

All the best,

James

Not according to the doc's above.

Thats right; another documentation issue that will be addressed!

Thanks. Lost an hour of remote hands time as he could ping the unit but not get into the GUI as he was following the wrong guide. Admittedly he should have raised/hunt around the support site.