RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
01-14-2025 04:26 PM - edited 01-17-2025 05:02 PM
Continuing this issue I am reposting the issue posted by someone as i dont get proper reply in comments.
https://community.ruckuswireless.com/t5/ICX-Switches/DHCP-server-icx-7750/m-p/101495#M7109
SW version is 08.0.95pT203
I have created 2 VLANS. For example vlan 100 and vlan 101
For vlan 100 I have used the dhcp pool created on ICX7750 and For Vlan 101 I used the TP-link router to provide DHCP. Both PC+ Mobile working fine with VLAN101 in SSID101 but VLAN 100 has SSID 100 in AP on which only PC get connects.
On checking VSZ6.1.2 it shows in AP clients i can see the DHCP ip received by the PC but the DHCP from the mobile phone reaches to VSZ but it shows 0.0.0.0:: and it donot request the dhcp to switch but incase of PC it does with the same SSID.
On checking via Wireshark:
--On Laptop (Wi-Fi)
--Receives DHCP Pool Address
DHCP Request:
*Option:(50) Requested IP address (192.168.92.4)
DHCP ACK:
*Option:(54) DHCP Server Identifier(192.168.92.1)
--On Mobile (Same Wi-Fi)
--Do not lease IP address, no Request and ACK, Only Discover is seen in Wireshark
*Option:(53) DHCP Message Type (Discover)
DHCP: Discover (1)
*Option:(61) Client Identifier
Client Mac Address:<------>
*OPtion:(12) Hostname
Hostname: <Redmi-12-5G>
*option:(55) Parameter Request list
Length:12
Parameter Request List Item: (1) Subnet mask
Parameter Request List Item: (3) Router
Parameter Request List Item: (6) Domain name Server
Parameter Request List Item: (15) Domain name
Parameter Request List Item: (26) Interface MTU
Parameter Request List Item: (28) Broadcast Address
Parameter Request List Item: (51) IP Address lease time
Parameter Request List Item: (58) Renewal time value
Parameter Request List Item: (43) vendor-specific Information
Parameter Request List Item:(114) DHCP Captive-Portal
Parameter Request List Item: (108) IPv6-Only Preferred
switch configuration:
ip dhcp-server pool vlan100
excluded-address 192.168.92.1
!
excluded-address 192.168.92.100 192.168.92.254
lease 1 0 0
network 192.168.92.0 255.255.255.0
option 3 ip 192.168.92.1
deploy
ip helper-use-responder-ip
interface ve 100
vrf forwarding abc
ip address 192.168.92.1 255.255.255.0
ip helper-address 1 192.168.92.1
also globally i have enabled
ip dhcp-server enable
ip dhcp-server relay-agent-echo enable
