cancel
Showing results for 
Search instead for 
Did you mean: 

Creating HA for Virtual SmartZone-H

tien_phan_anotw
Contributor
Hi,

I am back 🙂 
I have just deployed two vSZ version 5.1.1.* on two Proxmox servers. And now wanted to make an High Availability between them. 

However, I could not find any document, also article about this one. Does anybody already do it? could you give me any advices? 

Thank you so much!
22 REPLIES 22

Anusha_Vemula
Community Manager
Community Manager
Hi there,

If you have completed the setup wizard on both the controllers, then there is no option to setup HA/cluster now between them.

You will receive an option to set up the HA/Cluster in the setup wizard only.

- Anusha

Luckily, i still don't complete the setup wizard. I just started vSZ running. 

So, the HA option can be configured on step configuring vSZ-E/ H? You can give me more details about this. 

Thank you @Anusha !

Please follow the below article for cluster configuration details.

https://support.ruckuswireless.com/articles/000009525

- Make sure that both the controllers are either vSZ-E or vSZ-H. You cannot form a cluster between vSZ-E and vSZ-H.

- Both the controllers should be on the same software version.

We will be releasing a video soon on this topic. Please monitor our 'How-To-Hub' page for more videos or articles.

https://support.ruckuswireless.com/how-to-hub

Greatttttttt! I am appreciated for your help 🙂 
also follow your how-to-hub