12-18-2021 08:40 AM
Hello,
I have something weird going on, but I'm trying to figure out how to fix this issue. I have an AP with FW: 6.0.0.0.1594, and I reset its configurations via the physical AP & via the vSZ-E (FW: 6.0.0.0.1331). The issue I'm encountering is - once those configs are reset (AP), it connects back to the vSZ, however instead of having default configs (Staging Zone), it goes back to the original config (AP Zone) that it was initially placed in.
To my knowledge, any new AP that gets connected to the vSZ is placed in a staging zone (no config) until it's moved to a proper zone with the appropriate parameters set for that zone. However in this case, it continually gets those initial configs post-reset. Any idea what it is that I'm doing wrong?
I have 2 zones set, along with 2 AP's - an H510, and an R550. The H510 is set in its respective zone, and even when I place the R550 back in the "staging zone" it still acts as if it has the H510's parameters. This worked in the initial install (when everything was freshly set up), and I was able to test the functionality of both the vSZ & the remote AP's. But now it's acting weird.
Random thoughts:
any ideas? Thanks for the help!