Showing results for 
Search instead for 
Did you mean: 

How do i disable channel 100 to 136 on SZ100

New Contributor II
Hello everyone,

We have a SZ100 with os 3.2 with 90 ap's on 10 locations.
88 of them are outdoor ap's on locations with a lot of radar interference .

Its unbelievable to me that the Ruckus system only uses the channels 100 to 136 witch are the channels where the radar operates at. Channelfly doesn't do anything.
Even more unbelievable is that the 2 indoor ap's who are not affected by radar operate on the radar free channels 36 40 44 and 48.

If i force the ap's and ap groups only to use channel 36 to 64 the ap's update there configuration but still operate on channel 100 to 136.

Has anyone got any advice or help cause this is a very big problem and damaging our trust in the ruckus system.

Image_ images_messages_5f91c42f135b77e2479a7ecc_bf1a7f100642a9f35ab2e81783541961_RackMultipart2016080940515180l-ebfc7266-af97-4edb-8e83-e8d96963949f-860449860.jpg1470774805

Hi Guy just go Configuration...Access point...Common settings then unpick desire channel

Also unforce Channel on Ap group all should be okay

Thanks for your reply, the common setting did not work either.
Tomorrow i am going to try force the channels by CLI.