We have a SZ100 with os 3.2 with 90 ap's on 10 locations.
88 of them are outdoor ap's on locations with a lot of radar interference .
Its unbelievable to me that the Ruckus system only uses the channels 100 to 136 witch are the channels where the radar operates at. Channelfly doesn't do anything.
Even more unbelievable is that the 2 indoor ap's who are not affected by radar operate on the radar free channels 36 40 44 and 48.
If i force the ap's and ap groups only to use channel 36 to 64 the ap's update there configuration but still operate on channel 100 to 136.
Has anyone got any advice or help cause this is a very big problem and damaging our trust in the ruckus system.