unleashed shows my switch as disconnected & the wifi speed is 50% of my wired speed

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

Hello Ruckus Team/Users,

I've two problems with my unleashed network.

1. The unleashed dashboard shows my switch as "disconnected" though the switch firmware is > 08.0.90
2. The unleashed wifi speed is <50% of my wired speed.

My network:- I've a 1 GIG fiber connection from ATT. The ATT gateway (IP passthrough mode) is connected to an Edge-router Lite (router) which is connected to Ruckus switch (ICX7150-C12 firmware:08.0.95dT211). The switch gives wired connection to my home and to 2 R510 APs (firmware:200.12.10.5.234).

I've around 920Mbps on my wired network and around 450Mbps on my unleashed wifi. Is this the expected throughput with R510 APs? its almost ~50% of my wired throughput. The clients where i tested the wifi speed are - Iphone 12 pro max/ Mac book pro (2019). Both of these would support 867Mhz, I believe. How can i troubleshoot why the AP's gives only 50% of the available speed?

https://i.imgur.com/AgoVYSC.png
https://i.imgur.com/T7X2GkY.png
https://i.imgur.com/dMU0ZQU.png
https://i.imgur.com/PNLvXxk.png

I can provide any more information if needed. Thanks in advance

Regards

Prasad

2 REPLIES 2