cancel
Showing results for 
Search instead for 
Did you mean: 

intermittent wifi

Natkatsmom
New Contributor

I have followed all the instructions to reset and update the switch post loss of power, all three options, and am unable to execute access to install the patch or flash the ROM.  I have a computer expert assisting and unable to do this.  What is the next possible solution? Can someone remote in and assist or can I send the unit for updates? This is extremely frustrating and impacting work.

12 REPLIES 12

Imran_ruckus
Moderator
Moderator

Hi @Natkatsmom 

Greetings!!!

Thank you for reaching out to RUCKUS Lennar Home Community. 

We appreciate your patience and understanding as we work to resolve the issues you are experiencing with your RUCKUS setup.

Based on the information provided, it appears that you are encountering intermittent internet connectivity. 

We apologize for any inconvenience this has caused and are committed to assisting you promptly.

We may need to check some configurations of your RUCKUS ICX-7150-C12P Switch to troubleshoot this issue.

To proceed with troubleshooting the issue, please follow the steps outlined below to access the Command Line Interface (CLI) and provide the necessary command outputs:

1. First, identify the current IP address assigned to the switch ICX-7150-C12P by your local router. You can use an IP scanner tool to easily locate the switch's IP address on your network. Here is a guide on how to perform this using IP Scanner free applications: 

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/How-to-find-the-IP-Address-o...

2. Once you have identified the IP address of the switch, proceed to access the Command Line Interface (CLI) of the RUCKUS ICX-7150-C12P switch. Here is a guide on how to access the CLI: 

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/How-to-access-the-Command-Li...

If you can access the Command line the prompt should look like below:

ICX7150-C12 Router> OR

ICX7150-C12 Switch>

3. After successfully accessing the CLI, please execute the following commands and provide the outputs:

   enable

   show version

   show flash

   show inline power

   show inline power detail

   show interface brief

Please share the command outputs or screenshots if you encounter any issues or errors during these steps. 

Feel free to reach out if you have any questions or require further assistance.

Thank you for your cooperation and patience.

 

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community

brunodavid
New Contributor

If your internet keeps dropping, it can be frustrating and disruptive. Start by checking your modem and router;  directv tv packages  restarting them can resolve many connectivity issues. Ensure that your cables are secure and free from damage. If the problem persists, consider changing your Wi-Fi channel or updating your router's firmware. Contact your internet service provider for further assistance if needed.

Hello @brunodavid 

Greetings!!!

I hope this message finds you well.

Thank you for your valuable suggestion. We sincerely appreciate the time and assistance you've provided.

Please don't hesitate to contact us with any further queries or concerns regarding RUCKUS Lennar Home setups.

Once again, thank you for your time and support.

 

Best regards,

Imran Sanadi 

RUCKUS Lennar Home Community

Imran_ruckus
Moderator
Moderator

Hi @Natkatsmom 

Greetings!!!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

Thank you.

 

Best regards,
Imran Sanadi
RUCKUS Lennar Home Community