cancel
Showing results for 
Search instead for 
Did you mean: 

Wireless Access point spotty after lights flickered

Nbirdwell
New Contributor

The lights went off and on then the access point did not work.  I unplugged internet and back in then unplugged switch box and back in.   Lights on front of access point were green but the back had an orange light flashing.  Unplugged the cable from access point to switch but now the thermostat is going off and in line and Alexa will not play and phones will not connect    What do I need to do   Thank you

11 REPLIES 11

Orlando_Elias
RUCKUS Team Member

Hello @Nbirdwell 

Please apply a factory reset to the AP and then follow the instructions in the below how-to video.

https://www.youtube.com/watch?v=z4zbJcBSuuw

With regards,
--
Orlando Elias
Technical Support

Yes it is a lennar home we purchased from someone not lennar directly.  I purchased the switch and set it up 3 years ago

I am pressing reset on the access point and will follow the video

I do not have a configure me option.  And the light on the back is flashing green now.