Unleashed: ISP Router + VPN Router with different SSID on one R510 Access Point

[arwa]

Hi 

I've got a setup at home with my ISP router linked to a r510 access point via ethernet. I'd like to add a second ethernet connection from a GL.Inet VPN router to the 2nd port of the access point and have that broadcast on a separate SSID. Is this at all possible on the latest r510 unleashed firmware?

[pinky_ruckus · Accepted solution]

Hi @arwa ,

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that you are looking to connect the VPN router to the second port of the Access point and add a second Ethernet connection.

You may connect the VPN router to the second port on the Access point, but it is limited to a maximum speed of 100 Mbps. We recommend connecting the VPN router directly to the switch or ISP router using an Ethernet cable for better performance and less traffic.

Please let us know if you have any queries in this regard.

Thank you for your patience and understanding.

Regards,

Pinky Rajendran

RUCKUS Lennar Home Community

[pinky_ruckus]

Hello @arwa ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

[pinky_ruckus]

Hello @arwa ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

[arwa]

Your response was perfect, thank you. I'll have to get a switch to configure both my isp router and vpn router to broadcast separate ssid's on the r510 access point.

I was hoping it could be done without a switch but your response has clarified that. 

Many thanks again