09-30-2023 11:39 AM
I have same issue as many others - tried so many times to reset by inserting a paperclip by holding for 20 seconds etc - but it doesnt get reset. it still shows me "Lennar-xxxxx" instead, I am expecting it to show "configure.me-xxxxx" - please help.
just fyi - I have primary WAP installed inside a QnQ panel in closet - I am resetting from here. do I need to reset the ones installed on ceiling?
10-02-2023 05:53 AM
Hi @nitech
Greetings of the day,
Thanks for the detailed description of the issue.
To solve this issue we need to check whether all the devices are connected properly as mentioned in the below image.
Also please share the image of the access points using the below guide.
R510 LED lights
Here is where you can upload the image/photo :
you can also drag it to the chat.
Please let us know if you have any queries in this regard.
Best regards,
Jayavidhya
Lennar Home Community
10-02-2023 10:25 AM
Hi Jayavidhya, here is the link to google drive with couple of photos and a video - they are not super clear - but I am assure you that the diagram you provided - is what I have as setup.
I believe the issue is reseting the device.
https://drive.google.com/drive/folders/1DFIZcNL1XYmhEm49ZtL0LedET1b6brBw?usp=sharing
10-04-2023 05:49 AM
Hi @nitech
Based on the images you have shared it seems like the cable coming from the AP/ ISP router has been wrongly connected to the switch.
So please connect the cable to one of the 12 ports of the switch as mentioned below.
Please let us know if you have any queries in this regard.
Best regards,
Jayavidhya
Lennar Home Community
10-04-2023 04:07 PM
thank you so much Jayavidhya, that worked finally.
couple of more questions:
1. I have 2 ruckus boxes (excluding one installed in my closet QnQ panel) - I had reset 1 of them and now its connected to wifi. but the other ruckus box is not connected (I believe) as it has same yellow lights like previous screenshot.
I am attaching screenshot of the QnQ panel and the problematic ruckus.
what I am trying to achieve: the current working ruckus box will give wifi to back side of my house and the front (currently not working) one will give wifi to front side of my house.
please help.
2. in spectrum wifi, I used to get "Wi-Fi 6" icon but now with ruckus, I get general wifi (wifi icon). anything you can help me to get the Wi-Fi 6? as its better.