cancel
Showing results for 
Search instead for 
Did you mean: 

Turned off both bands can’t access AP wifi

502angler
New Contributor

I believe I may have accidentally turned off both bands (2.4/5) through unleashed mobile. Now I am unable to see my network. I can see my router wifi still if I turn it on. Both of my AP’s have solid green light on power but nothing for 2.4 or 5. I have tried accessing the switch through putty but it is above my understanding. Please help.

1 REPLY 1

vijaykuniyal
Internal Employee

Hi 502angler,

You can access the Unleashed AP GUI with Unleashed AP IP address via cable network using a Web browser and then you can re-enable the AP radio.

From web Login page>>>>>

vijaykuniyal_0-1668368232968.png

Select Access Point>>>>>

vijaykuniyal_1-1668368291506.png


Select AP Summary>>>>>Edit

vijaykuniyal_2-1668368794150.png
Verify Status of WLAN service>>>> If Disable>>>Change to Enable on both the radio and Click OK.

vijaykuniyal_4-1668368965651.png

Same settings can be verified from individual AP>>>>>Edit>>>> if WLAN service>>>>>Override Group Config is in checked state and Disable>>>>Change to Enable.

vijaykuniyal_5-1668369098335.png

 

vijaykuniyal_6-1668369157278.png

 

Vijay Kuniyal

Staff Technical Support Engineer

CCNA RnS | CCNA Wireless | RASZA | Meraki CMNO | RACPA