03-11-2024 08:41 AM
I have the RUCKUS wifi extenders for about 4 years. Currently televisions are freezing and indicating no internet connection. ISP says router is working good. All devices are connected to RUCKUS, its about 20 devices. Could this be the problem? I have the following version Ruckus R550 Indoor Wireless Access Point NO Subscription (901-R550-US01)..Is there any type of troubleshooting I can perform?
03-12-2024 05:26 AM
Hi @nicco_06
Greetings!!!
Thank you for the response and the update.
I see from the pictures you shared, light status and connections are in a normal state.
We may need to check some Switch configurations via CLI to fix the issues.
Please follow the below steps to access CLI and get the output of the below-mentioned commands.
Please follow the below steps and help us with the queries,
1. To check this issue, we must identify the ‘current’ IP address assigned by your local router to the switch ICX-7150-C12P
I will leave you a guide on how to perform an IP scanner on your local network to identify the switch IP address very easily.
How to find my Ruckus “Devices IP address” using free applications:
2. Once we identify the IP address of the switch proceed to access remotely to the device “Command Line”
How to access the Command Line Interface (CLI) of the RUCKUS ICX-7150-C12P Switch
If you can access the Command line should look like this:
ICX7150-C12 Router> OR
ICX7150-C12 Switch>
Please enter the below commands once you log in to CLI and share the output.
Note: Hit Enter to accept each command
enable
show version
show flash
Please share the output of the above commands or share the screenshots if stuck at any step or error (if any) and let me know if you have any queries in this regard.
Thank you again for your patience and understanding.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.
03-14-2024 06:58 AM
Hi @nicco_06
Greetings of the day!!!
Hope you are doing well.
Could you please update me on the status of this issue?
Please help us with the requested queries to assist you further or let me know if you have any queries in this regard.
Thank you.
Best regards,
Imran Sanadi
Lennar Home Community.
03-18-2024 06:50 AM
Good morning
Sorry for the late response, but I installed the IP scanner and I assume I am to install puTTY. I did that, but I am stucck at this point.
03-18-2024 06:55 AM
Hi @nicco_06
Greetings!!!
Thank you for the response and the update.
Could you please let me know if you are able to find the IP address of the RUCKUS ICX-7150-C12P Switch from the IP Scanner?
You should see the Switch Dashboard as shown in the below screenshot to confirm it’s a Switch IP Address.
Please check the other IP Addresses from the IP scan results, by the name of Ruckus Wireless or Brocade Communications to confirm the IP address of the Switch and access the CLI as described in the guide shared previously.
Please let me know if you have any queries in this regard.
Thank you again for your patience and understanding.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.
03-18-2024 07:38 AM
This is what I see from the IP scanner.