Team: Need an Assist

[wbryson795]

Recently purchased a Lennar Home with a Ruckus Wireless System. I had to hook up my new Wi-Fi Service then attempt to establish a connection from my Ruckus System (via CAT 5 Cable) to my Wi-Fi Modem.

However, my Wi-Fi service provider customer support technician said he could NOT help me with the Ruckus Connection because I did not have the Ruckus account or serial numbers to do so.

Does any have any recommendation how I can resolve this issue?

[Vásquez_Fer]

Hi @wbryson795 

Basically Yellow light means no clients connected to these bands , so as soon as you connect a device to the WiFi/WLAN/SSID created the lights should change depends on the radio that the PC or phone use to connect to the Wi-Fi 

Here is the meaning of each light on the Wireless Access Point

https://docs.commscope.com/bundle/unleashed-200.9-onlinehelp/page/GUID-19D4261B-D10B-4DE3-B63A-3498F...

Yellows light 2.4G: Radio is up, no clients are connected to the 2.4 GHz radio.
Yellows light 5G: Radio is up, no clients are connected to the 5 GHz radio.

So, if there is a device (iPhone) that is using the 5G radio, the light on the Access Point will be turning green on the 5G radio indicating that there is a client/device using that radio (5G)

More details for the radio 2.4G and 5G

A 2.4 GHz connection travels farther at lower speeds, while 5 GHz frequencies provide faster speeds at shorter range. What depends on whether to use 5g or 2.4G will depend on the end device (such as phones/pc/ring door/Mac devices/iPhone) They choose whether to use 2.4g or 5g auto. It will also depend on the network (Wi-Fi / SSID / WLAN ) configuration if it is 2.4 or 5G only.

Best Regards 

Fernando Vasquez