RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
04-21-2026 12:14 AM
04-21-2026 07:07 AM
Hello Johnss
- Was the Switch connected to the Unleashed and working fine before?
- Is the switch running firmware version 08.0.90 or later?
- Is Auto Approval enabled on the Unleashed network? If not, have you manually approved the switch join request?
- Are there any error messages or logs on the Unleashed dashboard or the switch?
Kind regards,
Sofia Gätjens
Technical Support Engineer | L2 TAC Wired
04-22-2026 06:51 AM
Hi @Johnss
Greetings!!!
I trust this message finds you well.
I kindly request an update on the status of the issue so that we may proceed further with resolving it.
Thank you.
Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support
04-24-2026 05:19 AM
Hi @Johnss
Greetings!!!
I trust this message finds you well.
I kindly request an update on the status of the issue so that we may proceed further with resolving it. Could you please confirm the RUCKUS Switch firmware version?
Thank you.
Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support
04-27-2026 06:18 AM
Hi @Johnss
Greetings!!!
I trust this message finds you well.
I kindly request an update on the status of the issue so that we may proceed further with resolving it.
If we do not receive a response from you within 24 hours from the timestamp of this message, your case will proceed to closure.
Thank you.
Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support
