08-05-2024 07:23 AM
To preface, I do not speak technology. But I spent over 10 hours yesterday trying to fix this issue on my own by reading this forum and other Ruckus documents.
The past two weeks or so, my internet has been extremely slow (webpages very slow to load or not loading at all, Hulu will not stream, etc.). I have checked with my internet provider (Spectrum) and confirmed that their equipment is working properly.
I have three APs throughout the house and 1 switch (Ruckus ICX 7150-C12P). All of the cables to the switch show a green light. For most of the day yesterday, the power lights to all APs were green, and the CTL was off completely. This morning, the CTL light for the master AP and 1 other AP is yellow, but for the third AP it is off.
My unleashed dashboard shows that the switch is disconnected. I spent most of yesterday following instructions to reconnect it, but am unable to do because I cannot find the switch IP--and, I already tried locating the current switch IP using these instructions: How to find the IP Address of the RUCKUS Devices (Switch and APs) using IP Scanner free applications...
Can anyone please help?
08-05-2024 09:46 AM
That still didn't resolve the issue. I see three "Ruckus Wireless", but they all appear to be to the 3 APs (not the switch).
08-05-2024 09:52 AM
Hi @ashleedif
Thank you for your response and the update.
I apologize for the inconvenience you're experiencing.
Since the IP address of the switch is not visible, the next step is to gain console CLI access using a physical cable.
Please follow the instructions in the article below for console access and command execution:
How to Console into the ICX-7150-12CP Ruckus Switch
Please confirm once you have console access, and let me know if you encounter any issues.
Thank you again for your patience and understanding.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community
08-05-2024 09:55 AM
As mentioned in my first message, I have already tried those instructions as well to no avail. That did not work for me either.
08-05-2024 09:59 AM
Hi @ashleedif
Thank you for the response.
Please share the screenshots of the errors (if any) you are getting when trying to get console access or let me me know at what step it is not working.
Thank you again for your understanding.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.
08-05-2024 10:05 AM
When I select "Repair" and then "Finish" on the following page, everything disappears. What do I do next?