Ruckus switch - Model #: ICX 7150-C12P-2X1G is not working and no power

[jduddukuri]

Hello,

My internet has stopped working. I have no power lights on both of my wireless output devices. As I checked that there is power to devices, the ruckus ICX 7150 switch device has no power. Everything else plugged in the outlet has power. There are no lights coming from ICX switch and no lights coming from my to wireless output devices.
Seems the device diedImage showing device not working and not working.

Attached the photo showing the device not powering up and same outlet other devices is powered up.

Let me know the process for RMA.

Model #: ICX 7150-C12P-2X1G

Thanks

[Imran_ruckus]

Hi  @jduddukuri

Greetings!!!

Thank you for contacting Lennar Home Community.

Hope you are doing well!!!

From the case description, I could understand that your RUCKUS ICX-7150-C12P Switch is not powering up.

Could you please try to check by replacing another Power cord with the Switch? In case the current power cord had damaged. 

Also, please try to reset the Switch as described below:

1. Please try to disconnect from the Power outlet the ICX-7150 and reconnect.

2. Please try to press the reset button using a paper click or a small stick 

• Remove power from the switch.
• Press and hold the Reset button while applying power to the switch.
• After all the system LEDs flash amber, release the Reset button.

Below is the Guide and Videos link for your reference:

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-D3B5DB74-53A7-4F8D-82F9-6EB600879EE...

Video link: https://www.youtube.com/watch?v=6jHMTdo_hK4

Please let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

Lennar Home Community.

[jduddukuri]

Hi Imran Sanadi,

I changed the power cord which is working for other device (Printer) and it didn't worked.

I tried resetting the switch still it didn't worked. 

Seems it is dead.

Thanks

[Imran_ruckus · Accepted solution]

Hi @jduddukuri 

Thank you for the response and for sharing the requested information.

Based on the troubleshooting done, you confirmed, and we saw that after the reset and booting up the Switch, the failure persists and the Switch is dead. This Switch unit Should be RMA (Return Merchandise Authorization) in simple words replacing it.

Feel free to contact us via chat, comment you already have a post, copy the link from the post (URL) and paste it into the chat to start the unit replacement.

Please follow the below steps as shown in the below example:

As shown in the below picture, copy the link and share it via chat from the link provided below:

The below link is to contact us by chat (only)

https://support.ruckuswireless.com/contact-us

NOTE: Please feel free to mark the this post as ACCEPTED SOLUTIONS

Please let me know if you have any queries in this regard.

Thank you again and we appreciate your patience.

Best regards,

Imran Sanadi

Lennar Home Community.

[jduddukuri]

Thanks for sending the new switch.