Ruckus R510 Slowness

[joseph_nguyen_g]

Ruckus R510 Slowness - My topology Comcast Xfinity X1 router with 1Gbps service, measuring 850Mbps as the output. This goes to a Rucker switch C12P, and the output there is 825Mbps. However, coming out of the 2 APs, even with AP to AP speedtest, its only 400Mbps. At remote location in my house, i am only getting 40Mbps. Troubleshooting with Lennar Home network specialist, everything pointed back to the 2 APs, Ruckus R510 Unleashed. What was the last known working FW version that supported full-duplex speedtest with results near max speed ~800Mbps+?

[andrew_giancol1]

Good afternoon, What kind of device are you testing with? also, I feel like knowing your SNR/RSSI channelization (Width), how many streams your running would be important to know as well.

[joseph_nguyen_g]

multiple devices, laptop, wired connection. We took the APs, directly to the Switch, which is hardwired to the Comcast Modem/Router.  Disabled the WiFi SSID on the router. version of FMW I am running on Ruckus Unleashed R510 now is: Current firmware version:  200.7.10.102.64
I dont believe we have a noise or RF issue. more like fwm version or configuration.

[andrew_giancol1]

interesting, so you're having a bandwidth problem while connecting through eth1 as well? Are you by chance using a local IPERF3 server to help you? My thought here is that you'll need whoever owns the APs(owns the support entitlement) to set up a case with support directly. 

[joseph_nguyen_g]

Yes, Eth1 straight to the Switch, no issue. 825Mbps.  We already opened a case with Ruckus.
We just downgraded to older version: R510_200.6.10.1.312.bl7
No, we are not using local IPERF3 server at all.
and wifi speedtest coming off of the Ruckus APs, doubled.  However, AP-2-AP still hovering at 425Mbps.  
The excercise of downgrading to an older fmw doubled our speedtest on WiFi, leads me to think this is a purely firmware issue.