cancel
Showing results for 
Search instead for 
Did you mean: 

Ruckus Not Working

Danielle31491
New Contributor

Hello,

There was a storm that came through and knocked the Ruckus out. Since then, it has not been working properly. I have rebooted it several times and still no improvement. Will need further assistance. 

15 REPLIES 15

Hi @Danielle31491

Please provide the screenshot of the error you are seeing while try to fix the issue.

Best regards,

Jayavidhya

Lennar Home Community

149EA661-3FAB-452F-9E8C-1449E9EB0294.jpeg

B2B4CDE0-9210-49A5-BFED-D6051A3BB9C7.jpeg

8AD1F173-61A5-4898-9328-225CA6C1F1BF.jpeg

   

Hi @Danielle31491

 

 

Based on your description, as the access points are powering up also the green light in the switch indicates routing code issue.

Please follow up the below guide to solve the issue

How to Fix Routing code issues on Lennar Home users via Web GUI.

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Fix-Routing-code-issu...

 How to Fix Routing code issues on Lennar Home users via CLI

Guide#1 for CLI: 

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Fix-Routing-code-issu...

Guide#2 for CLI: 

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-solve-the-routing-cod...

Note:  if you have access to the Unleashed Dashboard and the Switch can be seen from there, it may look like the following image, ICX7150-C12-Router instead of ICX7150-C12-Switch, now before starting the steps of the guide, I will advise you to cable the computer directly to the Switch, since you will have a better connectivity than if you connect via wireless. 

  1. After fixing the issue of the Switch booting from the wrong partition, please perform an upgrade to the code 08095g UFI and upgrade both partitions primary and secondary with the switching code file named SPS08095gufi.bin, take into consideration that is the Switch is running a code lower than 08080 you need to upgrade twice, from the code you are to 08080f and then the recommended code 08095g UFI.

How to Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

How to upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

Upgrade a switch via Web GUI (ICX7150 Switch)

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-vi...

Best regards,

Jayavidhya

Lennar Home Community

 

This is still not working and now it’s worse than before. Now both of my Wifi are out and I have no internet access for my home. I really need someone to call me for further assistance. I work from home and these instructions that are not user friendly to someone who is not an IT specialist. 

Hi @Danielle31491


Effective November’2022, ‘Ruckus Support for Lennar Homes customers will no longer be handled by phone or email.
We will be exclusively supporting customers via this community forum support model.

I understand that the steps may be somewhat new, however, we cannot replace the chassis until you confirm that the hardware is damaged.
We have tried to create the guides as non-technical as possible, so that they are not difficult to follow; however, if you continue to have difficulty following the steps,
I would recommend that you seek outside help or a technician.

Best regards,

Jayavidhya

Lennar Home Community