Ruckus ICX 7150-12c changed to router

[AsifB]

My  ICX 7150- C12P switch has become a router (some how). Its behind ATT fiber router and now causing issues. In general all the same issues/symptoms as described in the link below:

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/Title-Fixing-RUCKUS-ICX-7150...

I can see my  switch as "192.168.1.86 / ICX7150-C12-Router" in my ATT router. After reviewing this site/Forums. i needed to confirm if indeed my switch booted as router (SPR). But not able to login 192.168.1.86 via web. This ID/Password is not working. I have tried may different combinations that i found in forums as well as from lennar sticker in my internet cabinet i.e admin/lennar.....

The only next option is to use CLI and re create new ID/Password in boot mode. I red some where that i should not do that without opening a case first. That said my question is is there a an easier way to reset the switch (i.e reboot or factory reset) ? 

Thanks

AB

[Imran_ruckus]

Hi @AsifB 

Thank you for the response and the update.

Please reboot (unplug and plug from the power outlet) the RUCKUS ICX-7150-C12P Switch once, restart PuTTy and try once again.

Please let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

[AsifB]

same error

telnet@ICX7150-C12 Router>enable
No password has been assigned yet...
telnet@ICX7150-C12 Router#
telnet@ICX7150-C12 Router#
telnet@ICX7150-C12 Router#show flash
Stack unit 1:
NAND Type: Micron NAND 2GiB (x 1)
Compressed Pri Code size = 25968884, Version:08.0.80dT211 (SPS08080d.bin)
Compressed Sec Code size = 29819448, Version:08.0.80dT213 (SPR08080d.bin)
Compressed Boot-Monitor Image size = 786944, Version:10.1.14T225
Code Flash Free Space = 1205006336
telnet@ICX7150-C12 Router#copy flash flash secondary
telnet@ICX7150-C12 Router#Load to buffer (8192 bytes per dot) ...................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................The calculated data payload crc 0x1dd5c5ea and the crc for the payload 0xbc1580ff mismatch

Invalid Image. No write to flash...
Copy Failed.
telnet@ICX7150-C12 Router#

[Imran_ruckus]

Hi @AsifB 

Greetings!!!

Thank you for the response and the update.

Apologies for the inconvenience.

This may be due to an old corrupt image. As your Switch is on an older non-UFI version. We suggest upgrading your RUCKUS ICX-7150-C12P Switch to a stable version.

Please refer to the below RUCKUS Lennar Knowledge base self-help guide for the upgrade process.

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/How-to-upgrade-RUCKUS-ICX-71...

As you can access CLI, We suggest to follow the 2nd option from the guide.

Please upgrade your Switch following the guide and let me know if you stuck at any point during the process.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

[AsifB]

I use option 1 with usb.

telnet@ICX7150-C12 Router#
telnet@ICX7150-C12 Router#copy disk0 flash mnz10114.bin bootrom
Flash Memory Write (8192 bytes per dot)
telnet@ICX7150-C12 Router#.............................................................................................................
Copy Done.

telnet@ICX7150-C12 Router#show files disk0
F 58690116 sps080~1.bin
F 25976488 sps080~2.bin
F 786944 mnz10114.bin
D 32768 [----] disk0/system~1

85453548 bytes 3 File(s) in disk0

telnet@ICX7150-C12 Router#copy disk0 flash sps080~2.bin secondary
telnet@ICX7150-C12 Router#Load to buffer (8192 bytes per dot) ...................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
SYNCING IMAGE TO FLASH. DO NOT SWITCH OVER OR POWER DOWN THE UNIT(65536 bytes per dot)...
.............................................................................................................................................................................................................................................................................................................................................................................................................
Copy Done.
telnet@ICX7150-C12 Router#show flash

Stack unit 1:
NAND Type: Micron NAND 2GiB (x 1)
Compressed Pri Code size = 25968884, Version:08.0.80dT211 (SPS08080d.bin)
Compressed Sec Code size = 25976488, Version:08.0.80fT211 (sps080~2.bin)
Compressed Boot-Monitor Image size = 786432, Version:10.1.14T225
Code Flash Free Space = 1204998144
telnet@ICX7150-C12 Router#boot system flash secondary yes

after the boot its up as switch.

telnet@ICX7150-C12 Switch>env
Invalid input -> env
Type ? for a list
telnet@ICX7150-C12 Switch>enable
No password has been assigned yet...
telnet@ICX7150-C12 Switch#
telnet@ICX7150-C12 Switch#show flash
Stack unit 1:
NAND Type: Micron NAND 2GiB (x 1)
Compressed Pri Code size = 25968884, Version:08.0.80dT211 (SPS08080d.bin)
Compressed Sec Code size = 25976488, Version:08.0.80fT211 (sps080~2.bin)
Compressed Boot-Monitor Image size = 786944, Version:10.1.14T225
Code Flash Free Space = 1205022720
telnet@ICX7150-C12 Switch#show version
Copyright (c) 2017 Ruckus Wireless, Inc. All rights reserved.
UNIT 1: compiled on Apr 6 2020 at 22:29:25 labeled as SPS08080f
(25976488 bytes) from Secondary sps080~2.bin
SW: Version 08.0.80fT211
Compressed Boot-Monitor Image size = 786944, Version:10.1.14T225 (mnz10114)
Compiled on Thu Nov 15 12:59:22 2018

HW: Stackable ICX7150-C12-POE
==========================================================================
UNIT 1: SL 1: ICX7150-C12-2X1G POE 12-port Management Module
Serial #:FEK3852Q0FW
Software Package: BASE_SOFT_PACKAGE
Current License: 2X1G
P-ASIC 0: type B160, rev 11 Chip BCM56160_B0
==========================================================================
UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module
==========================================================================
UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module
==========================================================================
1000 MHz ARM processor ARMv7 88 MHz bus
8192 KB boot flash memory
2048 MB code flash memory
1024 MB DRAM
STACKID 1 system uptime is 3 minute(s) 57 second(s)
The system started at 21:51:10 GMT+00 Sat Jan 01 2000

The system : started=warm start reloaded=by "reload"

Should i proceed with the "copy disk0 flash  SPS08095hufi.bin secondary" ?

the file name i have is SPS08095gufi.bin not h

[AsifB]

Its all done (I think). Thanks for all your help.

SSH@ICX7150-C12 Switch# show flash
Stack unit 1:
NAND Type: Micron NAND 2GiB (x 1)
Compressed Pri Code size = 31457280, Version:08.0.95gT211 (SPS08095g.bin)
Compressed Sec Code size = 31457280, Version:08.0.95gT211 (SPS08095g.bin)
Compressed Pri Boot Code size = 786944, Version:10.1.24T225 (mnz10124)
Compressed Sec Boot Code size = 786944, Version:10.1.24T225 (mnz10124)
Code Flash Free Space = 1053564928
SSH@ICX7150-C12 Switch#show version
Copyright (c) Ruckus Networks, Inc. All rights reserved.
UNIT 1: compiled on May 6 2022 at 23:24:50 labeled as SPS08095g
(31457280 bytes) from Secondary SPS08095g.bin (UFI)
SW: Version 08.0.95gT211
Compressed Secondary Boot Code size = 786944, Version:10.1.24T225 (mnz10124)
Compiled on Thu Apr 21 06:08:52 2022

HW: Stackable ICX7150-C12-POE
==========================================================================
UNIT 1: SL 1: ICX7150-C12-2X1G POE 12-port Management Module
Serial #:FEK3852Q0FW
Software Package: BASE_SOFT_PACKAGE
Current License: 2X1G
P-ASIC 0: type B160, rev 11 Chip BCM56160_B0
==========================================================================
UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module
==========================================================================
UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module
==========================================================================
1000 MHz ARM processor ARMv7 88 MHz bus
8 MB boot flash memory
2 GB code flash memory
1 GB DRAM
STACKID 1 system uptime is 31 minute(s) 22 second(s)
The system started at 23:28:26 GMT+00 Fri May 06 2022

The system : started=warm start reloaded=by "reload"