07-13-2023 07:08 AM
We have ruckus AP on every level in our townhome and the power light is blinking. None of the other lights including 5G and 2.4G are on. Can someone please help with this issue
07-13-2023 02:02 PM
Hello,
Can you please help me with the management credentials
07-13-2023 02:21 PM
Hi @Deepika
Please try the most common username and passwords ( This is key sensitive so please include capital letters )
Username:admin password: Ruckus!
Username:admin password: Ruckus1
Username:admin password: Lennar
Username:super password: sp-admin
Best regards,
Jayavidhya
Lennar Home Community
07-14-2023 07:32 AM
Looks like none of these are working for me
07-14-2023 07:55 AM
Hi @Deepika
Thanks for your response.
If default credentials do not work, please follow the below steps to reset the Password on the ICX-7150-C12P Switch:
Please follow the below guide to perform password recovery:
Password Recovery on a Ruckus ICX Tutorial video
https://www.youtube.com/watch?v=XJS28DWbHM4
Recovery Process:
How to console in the ICX-7150-C12P
2. Reboot the switch with the console cable attached and press "b" until the following is displayed.
Now again reset your new credentials as mentioned in the steps below:
Edit the current or create a new password and username by using the below commands:
enable
configure terminal
device(config)# username super password pass
Where the username is ’super’ and password ‘pass’
In order to allow the correct authentication please run the following commands:
Device(config)#crypto key generate rsa
device(config)# aaa authentication login default local
Now you could try using your new credentials to log in.
Please let us know if you have any queries in this regard.
Best regards,
Jayavidhya
Lennar Home Community
07-13-2023 09:02 AM
Will this resolve the power line blinking on the access point as well?
