Routing Code Issue Troubleshooting

[nfar]

I suspect I'm having issues with the routing code as I had a power outage and I was having a disconnected message in my unleashed. Now it's showing, "pending to join". I'm trying to get the IP address to login and complete the steps outlined here: https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Switch-Disconnected-After-Po... but I'm unable to locate my IP address to the switch. 

I'm using LanScan on a Mac to locate the IP address but I'm only able to find the IP address of the two access points. I'm unsure of how to proceed further. What additional steps can I take to find the IP address?

[pinky_ruckus]

Hello @nfar ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

[pinky_ruckus]

Hi @nfar ,

Greetings! 

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it. 

If we do not receive a response from you within 24 hours from the timestamp of this message, your case will proceed to closure.

Thank you.

Best regards,
Pinky Rajendran

RUCKUS Lennar Home Community

[pinky_ruckus]

Hello @nfar ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

[nfar]

Updated switch per instructions (super easy! thank you!) I'm looking at the access points and do not see the upgrade option. Version showing as: 200.9.10.4.243. Screenshot shows the screen I see. Clicking edit does not give me upgrade options.

[nfar]

.