Router CTL and Pwr blinking

[alpogi2dmax]

My Ruckus ICX 8150 is now working but the extenders seem not. The CTL and Pwr lights are blinking.

[alpogi2dmax]

It has been 3 hours and the light is still amber. What should I do now?

[Imran_ruckus]

Hi @alpogi2dmax 

Thank you for the response and the update.

Could you please let me know if you can see and connect to the Wi-Fi network from your RUCKUS Access Points?

As mentioned in my previous post, when the 2.4 GHz and 5 GHz LEDs are amber, it signifies that the radios are active and functioning correctly, but no clients or devices are currently connected. Once a device connects to either the 2.4 GHz or 5 GHz Wi-Fi radio network, the corresponding LED will turn green to reflect active connectivity.

Please let me know how it goes.

Thank you again for your patience.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

[alpogi2dmax]

This is what I see. I assume the two blue cables are the AP connection.

 

[alpogi2dmax]

I reset my AP. I had one as master. It now has a green light for the 5g. I’ve reset the other one but it still has an amber light for both 5g and 2.4g.

[alpogi2dmax]